[AIO] How to setup the AIO bot for the Yeezy 500 ‘Blush’

Image_11.png

In this Tutorial: We'll show you how to set up your AIO Bot for the Yeezy 500 Blush.

History:  The Yeezy 500 is the first Adidas x Kanye West original design that doesn't feature Boost technology, though the sole unit has a different history with the Three Stripes. The futuristic sole actually is almost 20 years old, having first debuted on Kobe Bryant's then-signature sneaker—the Adidas KB8 III—in 1999.

Prerequisites:

  1. Servers and How to use them Here
  2. Proxies and How to use them Here
  3. How to use captcha solving services Here
  4. How to Checkout Manually Here
  5. How to solve Manual Captchas Here

Introduction:

In order to cop the Yeezy using the bot, we will need to create tasks that include the shoe info (such as link, size, etc...) and assign a billing profile to those created tasks. Then the bot will add to cart and automatically check out for you on all sites dropping the Yeezy (ADIDAS, YEEZYSUPPLY, and Others). 

Instructions:
  • Set up the bot for ALL sites dropping the Yeezy to increase your chances of copping. do not focus on one site only! Click on the tab of each site to set it up. 
  • Please make sure to read carefully the recommendation section inside each tab.
  • Always make sure that you are running the latest update by checking the update status on the top right corner.

 

Adidas Setup Yeezysupply SetupOthers Setup
  1. Let's start by clicking on Mass Create since it's the easiest method to create a large number of tasks at once.

    AIObot.png

  2.  

    Capture.PNG

      • Select the Adidas site you want to cop from (if you are from the UK, select Adidas UK, and so on).
      • Input your size in the size box. Only on Adidas, you can input multiple sizes e.g: 9&10&11, which is highly recommended.
      • You can insert as many sizes you want and the bot will choose the available one! 
      • Insert the PID of the Wave Runner DB2908 in the Early Link field.
      • Choose a billing profile for those tasks. If you don't know how to create a billing profile, click here.
      • Choose how many tasks you want to create (we recommend using a ratio of 1 task per 1 proxy).
      • Click Add once you are done. adidas1.png
  3.  
      • Select Adidas2 and make sure you create 50% of your total tasks using Adidas2.
      • So if you want to use 100 Adidas tasks, create 50 tasks using "Adidas" and 50 tasks using "Adidas2"
      • You can also use multiple sizing which is recommended.
      • Insert the PID of the shoe DB2908 in the Early Link field.
      • Choose a billing profile for those tasks. If you don't know how to create a billing profile, click here.
      • Choose how many tasks you want to create (we recommend using 1 task per proxy)
      • Click Add once you are done.

        adidas2.png


  4. Let's say you have 100 Proxies and you want to create 100 tasks but you only want to cop 2 pairs. What you're going to do is to create 50 Tasks with one billing profile assigned to it and 50 tasks with another one. You want to do that so you don't get your orders canceled; you CANNOT cop more than a pair using the same info (Billing/Shipping, Email, and Card).

    Make sure to have the Checkout Once Per Site enabled in the billing profile settings. If you don't know how to do that, please check this article on How to set up a billing profile.

    • To do that in one Mass Create, input 50 Tasks in the Number of Tasks box and Select the first billing profile.

      adidas3.png

    • Then open Mass Create again, input all the information again with 50 tasks in the Number of Tasks Box and Select the second billing profile.

      Adidas4.png

Recommendations 

  • The release is at 10:00 AM EST For US and 1:00 AM PST | 4:00 AM EST for EU so start your tasks 5-10 mins before the drop and keep an eye on @theyeezymafia for more info
  • Always remember to solve captcha as soon as you start your tasks; keep solving captchas regardless of the errors you are getting inside, please Check this tutorial on How to solve Captcha for Adidas.
  • In this release, you will only need Normal Proxies. You will not need Monitoring proxies nor the use of HMAC Destroyer. Please check this tutorial on How to insert Proxies.
  • Captcha Solving Services are always recommended for faster captcha solving to get you through this step as quickly as possible. Please Check this article on Captcha Solving Services.

What to do and what not to do!

 To-Do:

    • Keep your tasks running no matter what errors you are getting.
    • Keep solving captchas until the item is sold out.
    • Keep an eye on the news strip in the bot and on our twitter account because we may update the bot before the release.

 NOT To-Do:

    • When running Adidas tasks, a new Google Chrome window may open. DO NOT Close it.
    • Don’t restart your tasks unless you are 100% sure that the proxies for those tasks are banned; otherwise, there is no need to restart the tasks no matter what errors you are getting.

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

0 comments

Please sign in to leave a comment.